0571-63432870
欢迎光临杭州富阳高昇阀门有限公司官方网站！
ZDF氮封装置
ZDF Nitrogen Sealed Unit
ZDF 系列氮封装置是本公司自主开发、研制的一套自力式微压力控制系统，主要用于保持容器顶部保护气（一般为氮气）的压力恒定，以避免容器内物料与空气直接接触，防止物料挥发、被氧化，以及容器的安全。特别适用于各类大型储罐的气封保护系统。该产品具有节能、动作灵敏、运行可靠、操作与维修方便等特点。广泛应用于石油、化工等行业。
氮封装置供氮、泄氮压力设定方便，可在连续生产的条件下进行。压力检测膜片有效面积大，设定弹簧刚度小，动作灵敏，装置工作平稳；
为确保储罐的安全，需在罐顶设置呼吸阀，呼吸阀仅起安全作用，避免了常规氮封装置中（供氮阀和泄氮阀启闭频繁易损坏的缺陷）；
The ZDF series of nitrogen sealed unit is the independently developed by our company.It is an independent pressure control system mainly used in maintaining the constant pressure of protective gas(typically nitrogen) the top of containers to prevent the materials from being volatilized and oxidized because if the direct contact with air,and protect the safety of containers.It is particularly applicable to all types of large scale storage tank gas seal protection systems.The product has the advantages of energy saving,flexible action,reliable running,convenient operation and repair etc.As a result,ti is widely used in petroleum,chemical and other industries.
The nitrogen sealed unit is convenient for the nitrogen supply and nitrogen pressure relief setting,and the operation can be done in the condition of continuous area,small spring stiffness,flexible action and stable device work.
The breather valve shall be equipped to ensure the safety of the tank.the breather valve only has the function of ensuring safety and it can avoid the damage caused by the frequent opening and closing of nitrogen valve and vent nitrogen valve.
标准规格(Standard specifications)
形式Type | 氮封装置Nitrogen Sealed Unit |
公称通径Body Size | DN15-DN200(1/2~18) |
公称压力Body Ratings | PN10,16,20,25,40,50,64 ANSI 150#、300# |
阀体及阀盖材质 Body&Bonnet Material | WCB,CF8,CF8M,CF3,CF3M,WC1,WC6,WC9,LCB,LCC,LC3,哈氏C… |
填料Packing | V型聚四氟乙稀 V-PTEE/柔性石墨 Flexible graphite |
垫圈Gasket | GRAP+304,GRAP+316,PTEE |
连接方式Connections | 法兰型（RF、MFM）Flange type(RF,MFM)/焊接型（SW、BW）Welding type(SW,BW) |
涂层Painting Color | 棕色漆Brown painting/不锈钢阀体可不涂漆No painting on stainless steel valve body |
压力调节范围 Pressure regulating scope(KPa) | 0.1~0.3 0.2~0.35 0.3~0.5 0.4~5.5 5~15 6.5~20 10~30 15~40 25~50 40~80 等（高压及特殊调节范围根据实际情况定high pressure and special regulating scope shall be decided according to practical situations） |
注：以上只是标准组合，根据工况条件，本表以外的规格也是可能的。
Note:the above is just a standard combination,according to the working conditions,other specifications are also possible.
